All Levels Access All articles
Equipment Guides

The Folder Isn't the Machine: Reading a Hired MEWP's Paperwork Properly

All Levels Access
The Folder Isn't the Machine: Reading a Hired MEWP's Paperwork Properly

Photo: MEWP hire paperwork inspection folder construction site UK, via cdn.mos.cms.futurecdn.net

When a hired MEWP lands on site, the handover usually involves a set of keys, a quick walkround and a folder. The machine gets most of the attention. The folder gets a glance. That is understandable, but it is also how small paperwork problems become large site problems. LOLER and PUWER are not just about having documents in a plastic wallet. They are about knowing which documents belong to the hire company, which belong to you, and whether the ones in front of you actually match the machine at the gate.

What the hire company should hand over

The hire company is responsible for supplying equipment that is suitable, maintained and thoroughly examined. For a MEWP, that normally means a current LOLER thorough examination report, usually at six-monthly intervals, along with maintenance and service records. The report should identify the machine by serial number, state the date of examination, list any defects or limitations, and show when the next examination is due.

You should also expect the manufacturer's operator manual for that model, the hire agreement and any relevant declaration or conformity information. Check that the serial number on the paperwork matches the serial number on the machine. It sounds obvious, but sister machines get swapped, folders get mixed up and a report for a similar model is not a report for the machine in front of you.

Look at the defects section. A report that says the machine passed but lists an outstanding item is not the same as a clean report. If there is a limitation, make sure you understand what it means before anyone goes up.

What belongs to you

PUWER puts duties on the user to ensure equipment is safe to use and inspected as necessary. In practice, that means a pre-use inspection before the machine is first used on your site, and ongoing checks as required by your own procedures. The hire company's pre-delivery check is not your pre-use check. It was done somewhere else, by someone else, before the machine travelled to you.

Your pre-use inspection should cover the obvious physical items and the functional ones: tyres or tracks, guards, rails, gate, harness anchor points, controls, emergency lowering, alarms, fluid levels, battery charge and any damage from transport. Record it. A tick sheet with no name, date or time is not much of a record. If something is wrong, quarantine the machine and tell the hire desk before it goes to work.

Operators also need familiarisation with the specific machine. That is not always a folder item, but it belongs in the same conversation. A card in a wallet does not tell you where the emergency lowering control is on a machine you have never used.

The gaps that cause trouble

The most common problems are boringly predictable. An expired thorough examination report. A report for the wrong serial number. A generic manual that covers a family of machines rather than the exact model. Missing pages. No record of a repair that was clearly done. A pre-use sheet that was signed before the machine arrived. A machine that passed its examination but picked up damage in transit.

There is also the gap between the hire company's paperwork and your site records. If the machine is on hire for weeks, the examination date can creep closer while the job runs on. Know when it is due and plan the swap or extension before it becomes urgent.

A five-minute folder check

Start with the serial number. Then the LOLER report date and next due date. Then the defects and limitations. Then the manual. Then the hire agreement. Then your own pre-use record. If any of those are missing or mismatched, do not shrug and carry on. Call the hire desk, get the correct document and note the conversation. If the machine cannot be used safely until the paperwork is resolved, it should not be used.

Paperwork does not replace eyes on the machine, and eyes on the machine do not replace paperwork. You need both. The folder is not the MEWP. But a folder that does not match the MEWP is a warning sign worth taking seriously.

All Articles

Related Articles

What the Hire Desk Calls Height Is Rarely What Your Gutter Sees

What the Hire Desk Calls Height Is Rarely What Your Gutter Sees

The Building Was Here First: Access Equipment for Listed and Heritage Sites

The Building Was Here First: Access Equipment for Listed and Heritage Sites

The Clip That Passes the Gate: MEWP Harness Habits Worth Fixing Before the Walkround