When the Forecast Says Fine and the Basket Says Otherwise
Photo by Photo by Troy Mortier on Unsplash on Unsplash
UK weather has a habit of making access work feel like a negotiation. A bright, still morning can turn into a gusty afternoon, and the machine that felt perfectly settled at nine o'clock can start to feel very different by two. The wind does not read the manual, the forecast is not site-specific, and the person in the basket is the one who has to make the call. The good news is that wind management is not guesswork. It is a routine of measuring, checking the right limits and writing down what you did.
Gusts and sustained speed are different animals
Most manufacturers publish a maximum wind speed for operating a MEWP, and that figure is usually about sustained wind rather than the short, sharp gust that catches a platform and makes everyone look up. A forecast saying 20 mph average tells you very little about the 35 mph gust that arrives between buildings at exactly the wrong moment. That is why a single number on a weather app is not a wind plan.
On site, you need to think in two layers. First, what is the general wind speed and direction doing over the next few hours? Second, what is happening at the machine, at height, right now? If the answer to the second question is worse than the first, the first one stops mattering quite so much.
Where the anemometer sits matters
A reading taken at ground level in a sheltered yard can be reassuringly low and completely misleading. Wind accelerates around corners, funnels between buildings, and behaves differently above the roofline than it does at the site gate. If you are measuring at ground level and the platform is going up 12 metres, you are measuring a different weather system.
Where practical, take the reading at or near platform height, or at the highest safe point that represents the working position. A handheld anemometer used from the ground can still be useful, but treat it as one data point, not the final word. Take readings in more than one spot, especially on sites with openings, alleys, exposed corners or tall neighbours. Note the direction as well as the speed. A steady wind from one side can be manageable; a swirling wind around a building corner is a different problem.
If the machine has an onboard wind sensor, use it, but do not hand over your judgement to it. Sensors can be shielded, dirty or positioned somewhere that does not reflect the basket. Cross-check it against your own reading and the forecast.
The manual is the boss, not the forecast
Before the machine goes up, find the manufacturer's wind limit for that specific model and configuration. Not the hire desk's general rule, not a figure from a similar machine last month, and not a number someone remembers from a training course. The manual, the data plate and the hire company's instructions are the documents that matter. Some machines have different limits for travel with the platform raised, for particular deck extensions, or for attachments. Some have a maximum wind speed that is lower than the site's general limit.
Then add the load. A platform carrying two people and a few tools is one thing. A platform carrying a large sign, a sheet of cladding or a banner is a sail. Wind limits are not designed around the assumption that you will turn the machine into a kite.
Making the call when the programme is pushing
There is always someone who wants the job finished today. That pressure is exactly why the decision needs a simple rule: if the reading is at or near the limit, or the gust is making the platform uncomfortable, come down. A short delay is cheaper than an incident, a damaged building or a machine on its side. You do not need to apologise for stopping.
If work continues, make sure everyone knows why. The operator, the banksman, the site supervisor and anyone working nearby should understand the limit and the trigger for stopping. A wind check that only lives in one person's head is not a control measure; it is a hope.
Recording a wind check that stands up later
Write it down. Time, location, height of reading, device used, sustained speed, gust speed, direction, the manufacturer's limit, the action taken and who made the decision. If you stopped, record that. If you continued, record why you were satisfied. A photograph of the anemometer display can help, but the note is what tells the story.
Keep those notes with the hire paperwork and the pre-use inspection. If someone asks later why the job stopped, or why it did not, you want a trail that shows you checked, compared against the right limit and made a reasoned call. That is what a sensible wind management routine looks like in practice. It is not about paperwork for its own sake. It is about making sure the decision you made in a gusty yard still makes sense when you explain it in a warm office.